Roswell is in Fulton County. Rest Cabinetry supplies kitchen cabinets to Roswell kitchens from 6115 Jimmy Carter Blvd, Suite E in Norcross - collected the same day, or delivered across metro Atlanta in 7 to 10 business days.
In an older house the cabinets are rarely the hard part. The walls are. A run designed on paper for a room that is square meets a room that is not, and the gap is what everyone notices afterwards.
The first thing to establish is how much you are dealing with. Measure each wall run at the floor and again at counter height, about 36 inches. The difference between those two numbers is the problem, stated numerically. A quarter inch is normal. An inch is a plan that has to account for it.
| Filler strips | Trimmed on site to close the gap between a cabinet and a wall. The trick is placement: plan the run from the fixed points - sink, range, corners - outward, so the discrepancy collects in one filler at the end rather than being spread through the middle where it shows. |
|---|---|
| Scribe | A filler cut to follow the wall's actual contour rather than a straight line. This is what makes a run look built into the room instead of pushed against it, and it is why a run against an old plaster wall needs more filler width than one against new drywall. |
| Ceiling line | Measure at both ends. If the ceiling drops across the run, wall cabinets taken to the ceiling will show it. Stopping short and finishing with a molding hides a slope that a to-ceiling install would advertise. |
| Corners | The least forgiving point in an out-of-true room, because two runs meet and any error in either shows at the joint. Plan corners first, since they set where every cabinet in both runs begins. |
One style to be careful with. Inset - where the door sits flush inside the frame rather than over it - is the most exacting build and the least forgiving of a room that moves or was never true. It is a beautiful choice in a period kitchen and a demanding one; ask the question before ordering rather than after.
The practical defence against all of this is size range. With roughly 20,889 variations across the nine collections, a run can usually be covered by real cabinet widths plus one filler, rather than by two oversized fillers doing structural work.
| Warehouse | 6115 Jimmy Carter Blvd, Suite E, Norcross, GA 30071 |
|---|---|
| Hours | Monday to Saturday, 9:00 to 17:00. Closed Sunday. |
| Pickup | Same day |
| Delivery | 7 to 10 business days, business days only |
| Range | 9 collections, 73 products, roughly 20,889 size variations |
| Pricing | Opens when you register and log in |
Measure before you decide anything - how to measure a kitchen covers the sequence. Compare door styles on categories, work through sizes in shop cabinets, and see service areas for coverage across the metro. If the installation is handled by Rest Cabinetry, our own team assembles the cabinets as part of that work.
Measure each wall run at the floor and again at about 36 inches - the difference is the problem stated numerically. Then plan the run from the fixed points outward so the discrepancy collects in one filler at the end rather than showing in the middle.
A filler closes the gap between a cabinet and a wall with a straight cut. A scribe is cut to follow the wall's actual contour, which is what makes a run look built into the room rather than pushed against it. Old plaster walls generally need more filler width than new drywall.
Measure the ceiling at both ends of the run first. If it drops, to-ceiling cabinets will advertise the slope. Stopping short and finishing with a molding hides what a to-ceiling install would show.
It suits one, but it is the most exacting build here and the least forgiving of a room that is out of true or still moving. Worth asking about before ordering rather than after.
At the corners. They are the least forgiving point in an out-of-true room because two runs meet there, and they set where every cabinet in both runs begins.
Rest Cabinetry is at 6115 Jimmy Carter Blvd, Suite E, Norcross, GA 30071, Monday to Saturday 9:00 to 17:00. Same-day collection or 7 to 10 business day delivery.
With roughly 20,889 variations across nine collections a run can usually be covered by real cabinet widths plus one filler, instead of two oversized fillers doing structural work.
Pricing opens once you register and log in. Until then product pages read “Login to Buy”.
Log in to see prices and place orders
Don't have an account? Register