Kennesaw is in Cobb County. Rest Cabinetry supplies kitchen cabinets to Kennesaw kitchens from 6115 Jimmy Carter Blvd, Suite E in Norcross - collected the same day, or delivered across metro Atlanta in 7 to 10 business days.
Cabinets are flexible; appliances are not. A cabinet run can absorb a quarter inch in a filler, but a range either fits its opening or it does not. So the appliances decide the layout, and everything else fills in around them - which is the opposite of how most kitchens are planned.
Not the appliance dimensions - the required cut-out. They are different numbers and the difference is where kitchens go wrong. A "24-inch" dishwasher frequently needs slightly more than 24 inches of opening; a slide-in range has clearance requirements to combustibles on either side; a French-door refrigerator needs depth, plus door swing, plus air behind.
Never measure the old appliance. The one you are removing tells you what fitted the last kitchen, not what fits the next one. This single substitution - old appliance instead of new specification sheet - is the most expensive measuring mistake there is, because the cabinet is already made by the time it shows up.
| Range or cooktop | Sets the hood above it, and the hood's required clearance then sets where the surrounding wall cabinets can sit. Decide the hood at the same time, not later - it is the most common ordering mistake in a kitchen. |
|---|---|
| Refrigerator | The widest door swing in the room. Check it opens past 90 degrees without hitting a wall or an island, and leave the manufacturer's air gap behind and above. |
| Dishwasher | Beside the sink, on the side you naturally turn toward. Check its open door does not block the walkway or foul a corner cabinet door. |
| Sink | Fixed by the plumbing rather than by preference - see sink base cabinets. Moving the drain is a plumber's day. |
With those four placed, the run is mostly decided. Work outward from each fixed point toward the ends and the corners, and let any discrepancy from an out-of-true wall land in a filler at the end. Corners need planning early because they set where both runs begin - see corner cabinets.
The reason a large size range matters here is that appliance positions are not negotiable, so the cabinets have to take up whatever is left. Roughly 20,889 variations across the catalog is what lets those leftovers be real cabinets rather than a row of fillers.
| Warehouse | 6115 Jimmy Carter Blvd, Suite E, Norcross, GA 30071 |
|---|---|
| Hours | Monday to Saturday, 9:00 to 17:00. Closed Sunday. |
| Pickup | Same day |
| Delivery | 7 to 10 business days, business days only |
| Range | 9 collections, 73 products, roughly 20,889 size variations |
| Pricing | Opens when you register and log in |
Measure first - how to measure a kitchen. Compare finishes on categories, work through sizes in shop cabinets, and see service areas for coverage across the metro.
The required cut-out from the specification sheet of each appliance you intend to install - not the dimensions of the appliance, and never the old one you are removing. Then wall runs at two heights, ceiling height at both ends, and window and door positions.
Because it tells you what fitted the last kitchen, not what fits the next one. The new appliance's required cut-out is often different, and by the time that shows up the cabinets are already made.
The refrigerator, because it has the widest door swing in the room. Check it opens past 90 degrees without hitting a wall or an island, and leave the manufacturer's air gap behind and above it.
At the same time as the range, and before the wall cabinets. The hood's required clearance above the range dictates where the surrounding cabinets can sit, which is why leaving it late is the most common ordering mistake in a kitchen.
Only by moving the plumbing, which is a plumber's day rather than an adjustment. That is why the sink is treated as a fixed point the rest of the layout is planned around.
Rest Cabinetry is at 6115 Jimmy Carter Blvd, Suite E, Norcross, GA 30071, Monday to Saturday 9:00 to 17:00, with same-day collection or 7 to 10 business day delivery.
Because appliance positions are not negotiable, so the cabinets take whatever space is left. Roughly 20,889 variations is what lets those leftover spaces be real cabinets rather than a row of filler strips.
Register on the site and log in. Until then product pages read “Login to Buy”.
Log in to see prices and place orders
Don't have an account? Register